e - phemt mm ic ae 417 korean facilities : 82 - 31 - 250 - 5078 / rfsales@rfhic.com all specifications may change without notice us facility : 919 - 677 - 8780 / sales@rfhicusa.com 1 / 7 version 1. 2 product features application s ? small size ? 5 ~ 1100mhz (1db flat) ? high g ain ? high linearity ? higher productivity ? low cost ? low noise amplifier for catv, satellite ? cable modem ? ftth (g - pon, ge - pon) ? optical no de description ae417 is designed as low cost drive amplifiers for many applications including ftth, catv system. this mmic is based on gallium arsenide enhancement mode phemt which shows low current draw and very low noise. the data in this spec sheet i s valid only for 75 ohm application. 50 ohm data is in a separate spec sheet. electrical specifications parameter unit min typ max c ondition frequency mhz 5 - 1100 - gain db 13 15.5 14 - 5 ~ 200mhz 3 0 ~ 1000 mhz gain flatness db - 1 - 1 0 ~ 1 1 00 mhz inp ut return loss db - - 18 - 12 - output return loss db - - 16 - 14 - output ip3 dbm 38 41 - @ 500mhz/ 5 dbm 2tone 1db compression point dbm 22 25 - @ 500mhz noise figure db - 3 4 5 ~ 1000 mhz cso 50 ~ 870 mhz dbc - - 63 - 135channel@ 3 0dbmv/ch ctb dbc - - 73 - xmod dbc - - 76 - dc current ma - 120 - vdd = 8 .0v note 1. test conditions unless otherwise noted. test freq = 500mhz, t=25 , vdd= 8 v, 75? system 2. oip3 measured with 2 tones at an output power of + 5 dbm/tone separated by 1mhz , test freq = 500mhz ab solute maximum ratings parameter unit min typ max device voltage v dc - 8 1 2 operating case temperature - 40 - 85 storage temperature - 40 - 150 esd human body model - - class 1 b - moisture sensitivity level - - msl1 - junction temperature - 180 thermal resistance (rth) /w 50 package type : sot - 89
e - phemt mm ic ae 417 korean facilities : 82 - 31 - 250 - 5078 / rfsales@rfhic.com all specifications may change without notice us facility : 919 - 677 - 8780 / sales@rfhicusa.com 2 / 7 version 1. 2 application circuit @ 5 ~ 2 0 0mhz, 75ohm system parameter u nit t ypical frequency mhz 5 25 50 100 gain (s21) db 15.5 irl(s11) db - 23 - 25 - 28 - 34 orl(s22) db - 22 - 25 - 31 - 25 output ip3 dbm 40. 5 41. 5 42. 5 42 p1db db m 21 22. 5 24 24. 5 noise figure db 2.7 2.5 2.4 cso (1) dbc - 67 ctb (1) dbc - 81 xmod (1) dbc - 73 current ma 120 output 100 nf input ae 417 100 nf 100 nf 680 ohm 4 . 7 uf ( tantal ) 100 nf + 8 v 33 uh ( wirewound ) ( 1) 8 channels, +45 dbmv/ ch typical performance @ vdd= 8 v, ids= 12 0 ma, t=25 , 75ohm system 20 40 60 80 100 120 140 160 180 0 200 0 5 10 15 -5 20 -30 -10 10 -50 30 freq(ghz) return loss(db) gain(db) s-parameter noise figure vs frequency 0 1 2 3 4 5 10 50 90 130 170 210 freq(mhz) nf(db) p1 vs frequency 0 5 10 15 20 25 30 5 40 80 120 160 200 freq(mhz) p1(dbm) oip3 vs frequency 0 10 20 30 40 50 5 40 80 120 160 200 freq(mhz) oip3(dbm) s21 s11 s22
e - phemt mm ic ae 417 korean facilities : 82 - 31 - 250 - 5078 / rfsales@rfhic.com all specifications may change without notice us facility : 919 - 677 - 8780 / sales@rfhicusa.com 3 / 7 version 1. 2 mul ti - tone : test 8 ch_flat@output power + 45 dbmv/ch level : +45dbmv tilt : 135ch_flat frq xmd (ncta) ctb raw ctb cor n - flr csu raw csu cor csu frq csl raw csl cor csl frq 7 73.4 82.1 82.5 92.4 91.4 95.7 7.66 65.3 65.3 5.99 31 74.7 81.1 81.5 91.5 68.7 68.7 31.99 70.3 70.3 29.99 49 72.6 81.8 82.4 90.8 70.7 70.7 49.99 90.3 94.6 48.21 min 72.6 81.1 81.5 90.8 68.7 68.7 7.66 65.3 65.3 5.99 max 74.7 82.1 82.5 92.4 91.4 95.7 49.99 90.3 94.6 48.21
e - phemt mm ic ae 417 korean facilities : 82 - 31 - 250 - 5078 / rfsales@rfhic.com all specifications may change without notice us facility : 919 - 677 - 8780 / sales@rfhicusa.com 4 / 7 version 1. 2 application circuit @ 30 ~ 100 0mhz, 75ohm system paramete r u nit t ypical frequency mhz 30 500 1000 gain (s21) db 14 irl (s11) db - 11 - 19 - 18 orl (s22) db - 12 - 22 - 14 output ip3 dbm 40.5 41.5 36.5 p1db dbm 22 25.5 24 noise figure db 2.8 3.1 3.3 cso (1) dbc - 62 ctb (1) dbc - 73 xmod (1) dbc - 76 current ma 120 output 100 nf input ae 417 0 . 75 pf 10 nf 5 . 6 nh 430 ohm 6 . 8 nh 4 . 7 uf ( tantal ) 100 nf + 8 v 820 nh ( wirewound ) 0 . 5 pf 47 pf ( 1) 135 channels, + 3 0 dbmv/ ch typical performance @ vdd= 8 v, ids= 12 0 ma, t=25 , 75ohm system 0.2 0.4 0.6 0.8 1.0 0.0 1.2 0 5 10 15 -5 20 -20 -10 0 10 -30 20 freq(ghz) return loss(db) gain(db) s-parameter noise figure vs frequency 0 1 2 3 4 5 10 200 400 600 800 1000 freq(mhz) nf(db) p1 vs frequency 0 5 10 15 20 25 30 30 200 400 600 800 1000 freq(mhz) p1(dbm) oip3 vs frequency 0 10 20 30 40 50 30 200 400 600 800 1000 freq(mhz) oip3(dbm) s21 s11 s22
e - phemt mm ic ae 417 korean facilities : 82 - 31 - 250 - 5078 / rfsales@rfhic.com all specifications may change without notice us facility : 919 - 677 - 8780 / sales@rfhicusa.com 5 / 7 version 1. 2 multi - tone test : 1 35 ch_flat@output power +30dbmv/ch level : +30dbmv tilt : 135ch_flat frq xmd (ncta) ctb raw ctb cor n - flr csu raw csu cor csu frq csl raw csl cor csl frq 55.25 76.8 76.5 80.8 77 76 80.3 55.99 62.6 62.7 53.99 77.25 79 76.2 80.5 76.5 62.2 62.3 77.99 76.3 80.7 76.38 109.25 79.3 76.5 80.8 77.3 75.2 79.5 109.99 62.2 62.3 107.99 211.25 78.7 76.4 80.7 77.1 75.2 79.6 211.99 62.7 62.9 209.99 331.25 78.5 74.4 78.7 75.7 73.5 77.9 332.49 63 63.2 329.98 445.25 78.6 74.9 79.3 76.6 72.9 75.5 446.48 63.2 63.4 443.99 547.25 78 72.9 77.3 74.3 70.5 72.7 548.49 63.3 63.6 545.98 637.25 77.6 73.1 77.4 75 69.1 70.4 638.49 64.8 65.2 635.98 745.25 77.3 72.4 76.7 74.5 67.4 68.4 746.49 67.2 68.1 743.98 859.25 75. 9 71.1 75.4 72.6 65.5 66.3 860.49 71.8 76.1 858.49 min 75.9 71.1 75.4 72.6 62.2 62.3 55.99 62.2 62.3 53.99 max 79.3 76.5 80.8 77.3 76 80.3 860.49 76.3 80.7 858.49 multi - tone test : 1 35 ch_flat@output power + 2 0dbmv/ch level : +20dbmv tilt : 135ch_ flat frq xmd (ncta) ctb raw ctb cor n - flr csu raw csu cor csu frq csl raw csl cor csl frq 55.25 94.4 80.3 84.6 80.4 79.5 83.8 55.99 71 71.5 53.99 77.25 99.5 80.4 84.8 80.8 71.4 72 77.99 80.2 84.5 76.17 109.25 95.5 80.1 84.5 80.6 80.2 84.5 109.99 71.5 7 2.1 107.99 211.25 97.8 79.9 84.2 80.2 79.5 83.8 211.98 72.8 73.6 209.98 331.25 95.7 79.2 83.6 79.6 78.9 83.3 331.99 72.8 73.7 329.99 445.25 96 80 84.3 80.6 79.2 83.6 446.49 73.2 74 443.99 547.25 97.6 78.6 82.9 78.8 77.2 81.6 548.49 72.6 73.8 545.98 63 7.25 94.1 78.5 82.8 78.6 76.7 81.1 638.49 73.9 75.5 635.98 745.25 97.2 78.3 82.6 78.6 75.5 78.6 746.49 75.8 78.8 743.99 859.25 94.3 76.6 81 77.1 73.7 76.7 860.48 76.6 81 858.5 min 94.1 76.6 81 77.1 71.4 72 55.99 71 71.5 53.99 max 99.5 80.4 84.8 80.8 80 .2 84.5 860.48 80.2 84.5 858.5
e - phemt mm ic ae 417 korean facilities : 82 - 31 - 250 - 5078 / rfsales@rfhic.com all specifications may change without notice us facility : 919 - 677 - 8780 / sales@rfhicusa.com 6 / 7 version 1. 2 package dimensions (type: so t - 8 9 ) * u nit: mm[inch] | tolerance 0. 2 [.00 8 ] top view side view bottom view pin description pin no function pin no function 1 input 4 gnd 2 gnd - - 3 output / bias - - recommended pattern recommended mounting configuration * mounting configuration notes 1. ground / thermal via holes are critical for the proper performance of this device. 2. add as much copper as possible to inner and outer layers near the part to ensure optimal thermal performance. 3. mounting screws can be added near the part to fasten the board to a heatsink. ensure that the gro und / thermal via hole region contacts the heatsink. 4. do not put solder mask on the backside of the pc b i n the region where the board contacts the heatsink. 5. rf trace width depends upon the pc b material and construction. 6. use 1 oz. copper minimum.
e - phemt mm ic ae 417 korean facilities : 82 - 31 - 250 - 5078 / rfsales@rfhic.com all specifications may change without notice us facility : 919 - 677 - 8780 / sales@rfhicusa.com 7 / 7 version 1. 2 revision history part number release date version modification data sheet status a e 417 2014.04.22 1. 2 abs olute maximum ratings (delete tj typ) - a e417 2012.10.15 1.1 new datasheet format - rfhic corporation reserves the right to make changes to any products herein or to discontinue any product at any time without notice. while produ ct specifications have be en thoroughly examined for reliability, rfhic corporation strongly recommends buyers to verify that the information they are using is accurate before ordering. rfhic corporation does not assume any liability for the suitability of its products for any particular purpose, and disclaims any and all liability, inc luding without limitation consequential or incidental damages. rfhic produ cts are not intended for use in life support equipment or application where malfunction of the product can be expected to result in personal injury or death. buyer uses or sells such products for any such unintended or unauthorized application, buyer shall indemnify, protect and hold rfhic corporation and its directors, officers, stockholders, employees, representatives and distributors harmless against any and all claims arising out of such unauthorize d use. sales, inquiries and support should be directe d to the local authorized geographic distributor for rfhic corporation. for customers in the us, ple ase contact the us sales team at 919 - 6 77 - 8780 . for all other inquiries, please contact the internation al sales team at 82 - 31 - 250 - 5078
|
